Set for how long output for el. strike needs to be open

[Jantar]

Set the duration of active output/ the time in which you can open door or set output to toggle mode (max. 10 seconds).
Toggle mode means, if the user card is registered, output will remain opened (if it was closed) or closed (if it was open) till next registration.
Procedure:
-insert the master code and the press Enter key
-insert 2 and press the Enter key (2 is function - Pulse time/ Duration of active output or toggle mode)
-Enter the duration of active output in seconds (max. 10 seconds) and press the Enter key (1-10 seconds or 0 for toggle)
-if it is successful, the Lokus will confirm it with two beeps