Set for how long output for el. strike needs to be open

[Jantar]

Set the duration of active output/ the time in which you can open door or set output to toggle mode (max. 10 seconds).
Toggle mode means, if the user card is registered, output will remain opened (if it was closed) or closed (if it was open) till next registration.
Procedure:
-approach the master card to the Lokus
-wait for 2 double beeps and remove the master card (2 is function - Pulse time/ Duration of active output or toggle mode)
-the Lokus will start to beep every second, each beep indicates 1 second of active output
-when you hear the required number of beeps (max 10), approach a user card (confirmation of the function)
-if a user card is approached as soon as the master card is removed, the Lokus is in toggle mode
-if it is successful, the Lokus will confirm it with two beeps