Reader 3P - Codeks Device Manager & Codeks setup

Protocol reader for Populus V9 and Trigger controllers

Reader 3P - Codeks Device Manager & Codeks setup

Postby Jantar » Fri Nov 14, 2014 1:57 pm

The video shows how to find and change address and how to upgrade protocol readers with the Codeks Device Manager.
It also shows how to setup the protocol readers in the Codeks software.

To ensure proper operation, the access controller must be connected to the network switch.
In connection with the protocol readers the access controllers are used only with V9 communication protocol.
Protocol readers have a default address from 50 to 100. The address number is written on the label on the back of the product.

The hardware which is used in the video is:
- Populus P-2-3P-NET which has IP 192.168.110.217, port nb. 1001 and address nb. 217
- Reader K-1-3P which has address nb. 50
- Reader O-1-3P which has address nb. 51

During playback you can pause the clip at any time with left-click.

Jantar
Site Admin
 
Posts: 158
Joined: Fri Aug 27, 2010 7:26 am

Return to Reader 3P - Protocol Reader

Who is online

Users browsing this forum: No registered users and 1 guest

cron