The video shows how to find and change address and how to upgrade protocol readers with the Codeks Device Manager.
It also shows how to setup the protocol readers in the Codeks software.
To ensure proper operation, the access controller must be connected to the network switch.
In connection with the protocol readers the access controllers are used only with V9 communication protocol.
Protocol readers have a default address from 50 to 100. The address number is written on the label on the back of the product.
The hardware which is used in the video is:
- Populus P-2-3P-NET which has IP 192.168.110.217, port nb. 1001 and address nb. 217
- Reader K-1-3P which has address nb. 50
- Reader O-1-3P which has address nb. 51
During playback you can pause the clip at any time with left-click.